Fe3O4-modified thick film carbon-based amperometric oxidase-biosensor
Článekpeer-reviewedpublishedDatum publikování
2006
Vedoucí práce
Oponent
Název časopisu
Název svazku
Vydavatel
Univerzita Pardubice
Abstrakt
An amperometric biosensor was developed from screen printed carbon electrodes modified with magnetite as the transducer element and Nafion-entrapped glucose-oxidase as the bio-recognition layer, cast by drop-evaporation. In a flowing stream of phosphate buffer (pH 7.5/0.05M), at a working potential of-125mV vs. Ag/AgCl with an, injection volume of 100 ul, the biosensor has linear range of 7-150 mg l-1 glucose, a sensitivity of 3.8 nA mg-1 1 cm2, and a precision of 2% at 10 mg l-1. Uric acid, xanthine and hypoxanthine at 10 and 1000 mg l-1 do not cause significant error relative to 100 mg l-1 glucose. Ascorbic acid at 100 mg l-1 causes 10-14% deviations- Dilute blood samples showed average recovery rate of 95%. Thus this model biosensor is precise, fairly senstitive and accurate.
Rozsah stran
p. 265-279
ISSN
1211-5541
Trvalý odkaz na tento záznam
Projekt
Zdrojový dokument
Scientific papers of the University of Pardubice. Series A, Faculty of Chemical technology. 11(2005)
Vydavatelská verze
Přístup k e-verzi
open access
Název akce
ISBN
Studijní obor
Studijní program
Signatura tištěné verze
47333
Umístění tištěné verze
Univerzitní knihovna (studovna)
Přístup k tištěné verzi
Klíčová slova
biosenzory, uhlíkové elektrody, Amperometrie, tenké vrstvy