Publikace: Syntéza a elektrické vlastnosti objemových chalkogenidových skel obsahující stříbro
Disertační práceopen access| dc.contributor.advisor | Wágner, Tomáš | |
| dc.contributor.advisor | Zima, Vítězslav | |
| dc.contributor.author | Stehlík, Štěpán | |
| dc.contributor.referee | Špirková, Jarmila | cze |
| dc.contributor.referee | Tichý, Ladislav | cze |
| dc.contributor.referee | Němec, Lubomír | cze |
| dc.date.accepted | 2010 | cze |
| dc.date.accessioned | 2011-07-08T12:09:09Z | |
| dc.date.available | 2011-07-08T12:09:09Z | |
| dc.date.issued | 2010 | |
| dc.description.abstract | Tato práce se zaměřila na syntézu a studium elektrických vlastností objemových skel v obecném systému Agx(As0,33Ch0,67)100-x, kde Ch = S, Se, Te a jejich kombinace. Hlavním cílem bylo sledovat elektrické vlastnosti v závislosti na koncentraci stříbra a měnícího se chalkogenu. Detailně byly prostudovány tyto systémy: Agx(As0,33S0,67)100-x, Agx(As0,33S0,335Se0,335)100-x, Agx(As0,33Se0,67)100-x a Agx(As0,33Se0,335Te0,335)100-x. Úroveň koncentrace stříbra, kterou bylo možno zabudovat do základní chalkogenidové matrice AsCh2, se lišila systém od systému. Do systému Agx(As0,33S0,67)100-x bylo možno zabudovat až 26 at.% Ag; tato úroveň byla později zvýšena na 32 at.% Ag a je pravděpodobné, že hraniční koncentrace leží ještě výše. Do systému Agx(As0,33S0,335Se0,335)100-x bylo možno zabudovat až 26 at.% Ag, do systému Agx(As0,33Se0,67)100-x 14 at.% Ag a do systému Agx(As0,33Se0,335Te0,335)100-x 20 at.% Ag. Všechny vzorky byly připraveny přímou syntézou z prvků v evakuovaných křemenných ampulích. Amorfní stav vzorků byl ověřován rentgenovou strukturní analýzou a jejich mikroskopická homogenita skenovací elektronovou mikroskopií (SEM). Složení vzorků bylo ověřováno rentgenovou fluorescenční analýzou (EDX – energy-dispersive X-ray spectroscopy). Informace o struktuře jednotlivých fází u některých vzorků v systému Agx(As0,33S0,67)100-x podala mikro-Ramanova spektroskopie. Elektrické vlastnosti připravených skel byly studovány impedanční spektroskopií a potenciostatickou chronoamperometrií. Hodnoty skelné transformace byly určovány modulovanou diferenční skenovací kalorimetrií (MDSC). Bylo zjištěno, že v objemových sklech systému Agx(As0,33S0,67)100-x, Agx(As0,33S0,335Se0,335)100-x a pravděpodobně i v systému Agx(As0,33Se0,67)100-x nastává s přídavkem stříbra fázová separace na stříbrem bohatší fázi a stříbrem chudší fázi. Tento jev způsobuje perkolační průběh vodivosti s rostoucím obsahem stříbra, který je způsoben náhlým propojením stříbrem bohatší, více vodivé fáze. Tato objemová perkolace nastává v rozmezí 6 – 9 at.% Ag v závislosti na systému. U systémů s jasně pozorovatelnými fázemi (Agx(As0,33S0,67)100-x a Agx(As0,33S0,335Se0,335)100-x) roste v oblasti fázové separace vodivost přibližně lineárně, což naznačuje spolu s blízkými hodnotami aktivačních energií pro separované vzorky nad perkolačním prahem, že složení stříbrem bohatší fáze zůstává přibližně konstantní. Vodivost vzorků před objemovým perkolačním prahem nebylo možno z důvodu vysokého odporu změřit, což - 6 - naznačuje velmi malou koncentraci stříbra ve stříbrem chudé fázi. V oblasti homogenních skel vodivost rostla exponenciálně s rostoucí koncentrací stříbra. Skla v systému Agx(As0,33Se0,335Te0,335)100-x byla mikroskopicky homogenní a jejich vodivost s rostoucí koncentrací stříbra rostla přibližně exponenciálně. Spolu s celkovými vodivostmi zjištěnými impedanční spektroskopií byla určována i zbytková elektronová (děrová) vodivost potenciostatickou chronoamperometrií. Při této metodě bylo na vzorek opatřený iontově-blokujícími elektrodami přivedeno stejnosměrné napětí a z hodnoty ustáleného proudu po čase t byla vypočtena zbytková elektronová (děrová) vodivost. Bylo zjištěno, že skla v systémech Agx(As0,33S0,67)100-x a Agx(As0,33S0,335Se0,335)100-x jsou téměř výhradně iontovými vodiči, přechod od amorfního polovodiče k smíšenému iontově – elektronovému (děrovému) vodiči byl pozorován u systému Agx(As0,33Se0,67)100-x a u systému Agx(As0,33Se0,335Te0,335)100-x byla vodivost již výhradně elektronová (děrová). Druhým hlavním úkolem práce bylo sledovat elektrické vlastnosti skel v systému Ga2S3 – GeS2 – AgX, kde X = Cl, Br a I. Přímou syntézou z prvků a AgX byly v evakuovaných křemenných ampulích připraveny tyto vzorky: (100-2x)GeS2-xGa2S3- xAgI (x = 15, 20, 25, 30 at.% Ag), 60GeS2-20Ga2S3-20AgX (X = Cl, Br a I). Byly tedy sledovány dvě řady: v první rostl obsah jodidu stříbrného spolu se sulfidem gallitým, v druhé řadě byly testovány vzorky s konstantní koncentrací halogenidu stříbrného, ale měnila se jeho kvalita od chloridu, přes bromid po jodid. Amorfní stav vzorků byl potvrzen rentgenovou difrakční analýzou. Vodivost skel tohoto typu rostla s rostoucím obsahem AgI přibližně exponenciálně a pomocí potenciostatické chronoamperometrie bylo potvrzeno, že připravená skla jsou téměř výhradně iontovými vodiči se zanedbatelnou elektronovou (děrovou) vodivostí. Součástí této práce je i kapitola s naznačenými perspektivními směry, kterými by se mohl výzkum v oblasti amorfních iontových vodičů ubírat v blízké budoucnosti. | cze |
| dc.description.abstract-translated | This work is focused on the synthesis of bulk glasses in a general system Agx(As0,33Ch0,67)100-x, where Ch = S, Se, Te and their combinations, and their characterization from the point of view of their electrical properties. The main aim was to follow the development of electrical properties with increasing concentration of silver and changing constituent chalcogen atom at the same time. The detailed study has been done on these systems: Agx(As0,33S0,67)100-x, Agx(As0,33S0,335Se0,335)100-x, Agx(As0,33Se0,67)100-x and Agx(As0,33Se0,335Te0,335)100-x. The level of the silver concentration to be able to incorporate into the base chalcogenide matrix AsCh2 differed throughout the systems. It was possible to introduce 26 at.% Ag to the Agx(As0,33S0,67)100-x system and this level was later increased to 32 at.% Ag. It is very probable that the limit lies even higher. To the systems Agx(As0,33S0,335Se0,335)100-x, Agx(As0,33Se0,67)100-x and Agx(As0,33Se0,335Te0,335)100-x it was possible to introduce 26 at.% Ag, 14 at.% Ag and 20 at.% Ag, respectively. All the samples were prepared by direct synthesis from elements (5N purity) in evacuated silica ampoules. The amorphous nature of the samples was checked by X-ray diffraction and their homogeneity by scanning electron microscopy (SEM). The composition of the samples was verified by energy-dispersive X-ray spectroscopy (EDX). Information about structure of phase-separated domains in some suitable samples of Agx(As0,33S0,67)100-x system provided micro-Raman spectroscopy. Electric properties were studied by impedance spectroscopy and by potentiostatic chronoamperometry. Finally, the values of the glass transition temperatures were determined by modulated differential scanning calorimetry (MDSC). It was found, that in the Agx(As0,33S0,67)100-x and Agx(As0,33S0,335Se0,335)100-x bulk glasses , and most probably also in the Agx(As0,33Se0,67)100-x system a phase separation into a silver–rich and silver–poor phases appeared. This phenomenon causes a percolation behavior of the conductivity with increasing concentration of silver which is due to a sudden interconnection of the silver-rich phase. This volume percolation occurs between 6 – 9 at.% Ag, depending on the system. The conductivity increases nearly linearly in the systems with clearly observable phases, suggesting, together with close values of the activation energies in the samples above the percolation threshold, that the composition of the silver–rich phase remains almost constant. It was impossible to measure the conductivity of the samples under the percolation threshold due to their too - 8 - high resistances. This implies very low concentration of silver to be present in the silver–poor phase. In the region of homogeneous glasses the conductivity increased exponentially with increasing concentration of silver. The glasses in the Agx(As0,33Se0,335Te0,335)100-x system were microscopically homogeneous and their conductivity increased nearly exponentially with increasing concentration of silver. To distinguish the residual electronic (hole) conductivity from the total conductivity obtained by impedance spectroscopy the method of potentiostatic chronoamperometry was applied. The current vs. time dependence was recorded as the samples were under the constant voltage using blocking Pt electrodes. It was found that the glasses in the Agx(As0,33S0,67)100-x, Agx(As0,33S0,335Se0,335)100-x systems were almost exclusively ionic conductors with very low electronic (hole) contribution, whereas the transition from the amorphous semiconductor to a mixed ionic–electronic (hole) conductor was observed in the Agx(As0,33Se0,67)100-x system. The conductivity in the Agx(As0,33Se0,335Te0,335)100-x system was exclusively electronic (hole). The second main aim of this thesis was to study electrical properties of the glasses in the Ga2S3 – GeS2 – AgX system, where X = Cl, Br and I. The glasses of the following compositions: (100-2x)GeS2-xGa2S3-xAgI (x = 15, 20, 25, 30 at.% Ag), 60GeS2-20Ga2S3-20AgX (X = Cl, Br and I) were prepared by direct synthesis from the elements in evacuated silica ampoules. Two composition lines were studied: the concentration of the AgI increased in the first line and the halide changed from chloride across bromide to iodide in the second line. The amorphous nature of the glasses was confirmed by X-ray diffraction analysis. The conductivity increased nearly exponentially with increasing concentration of AgI. It was proved by the potentiostatic chronoamperometry that all the studied glasses were almost exclusively ionic conductors with negligible electronic (hole) conductivity contribution. Last chapter of this thesis is devoted to perspective areas of interest in the field of solid electrolytes that could be studied in the near future. | eng |
| dc.description.department | Katedra obecné a anorganické chemie | cze |
| dc.description.grade | Dokončená práce s úspěšnou obhajobou | cze |
| dc.format | 146 s.+ teze | cze |
| dc.identifier | Univerzitní knihovna (sklad) | cze |
| dc.identifier.signature | D23312 | |
| dc.identifier.uri | https://hdl.handle.net/10195/38787 | |
| dc.language.iso | cze | |
| dc.publisher | Univerzita Pardubice | cze |
| dc.rights | práce není přístupná | cze |
| dc.subject | chalkogenidová skla | cze |
| dc.subject | amorfní polovodiče | cze |
| dc.subject | iontové vodiče | cze |
| dc.subject | impedanční spektroskopie | cze |
| dc.subject | elektrická vodivost | cze |
| dc.subject | fázová separace | cze |
| dc.subject | prekolační práh | cze |
| dc.subject | chalcogenide glasses | eng |
| dc.subject | amorphous semiconductors | eng |
| dc.subject | ion conductors | eng |
| dc.subject | impedance spectroscopy | eng |
| dc.subject | electric conductivity | eng |
| dc.subject | phase separation | eng |
| dc.subject | percolation threshold | eng |
| dc.thesis.degree-discipline | Chemie a technologie anorganických materiálů | cze |
| dc.thesis.degree-grantor | Univerzita Pardubice. Fakulta chemicko-technologická | cze |
| dc.thesis.degree-name | Ph.D. | cze |
| dc.thesis.degree-program | Chemie a technologie materiálů | cze |
| dc.title | Syntéza a elektrické vlastnosti objemových chalkogenidových skel obsahující stříbro | cze |
| dc.title.alternative | Synthesis and electric properties of bulk chalcogenide glasses containing silver | eng |
| dc.type | disertační práce | cze |
| dspace.entity.type | Publication |
Soubory
Původní svazek
1 - 3 z 3
Načítá se...
- Název:
- SpirkovaJ_Synteza a elektricke vlastnosti_SS_2010.pdf
- Velikost:
- 621.02 KB
- Formát:
- Adobe Portable Document Format
Načítá se...
- Název:
- WagnerT_Synteza a elektricke vlastnosti_SS_2010.pdf
- Velikost:
- 250.95 KB
- Formát:
- Adobe Portable Document Format
Načítá se...
- Název:
- StehlikS_Synteza a elekticke vlastnosti_TW_2010.pdf
- Velikost:
- 13.83 MB
- Formát:
- Adobe Portable Document Format
- Popis:
- NEPŘÍSTUPNÝ SOUBOR