Zobrazit minimální záznam
dc.contributor.author |
Jašúrek, Bohumil
|
|
dc.contributor.author |
Vališ, Jan
|
|
dc.contributor.author |
Šrámková, Michaela
|
|
dc.date.accessioned |
2023-07-12T13:21:02Z |
|
dc.date.available |
2023-07-12T13:21:02Z |
|
dc.date.issued |
2022 |
|
dc.identifier.isbn |
978-86-6022-533-9 |
|
dc.identifier.issn |
2620-1429 |
|
dc.identifier.uri |
https://hdl.handle.net/10195/81315 |
|
dc.description.abstract |
Lamination of electrophotographic prints is more problematic than lamination of prints from conventional printing techniques as is for example offset printing. The main problem is worse adhesion of laminating films and due to partial or full delamination can occurs when prints are mechanically stressed. Often problem is also creation of optical effect called silvering. The aim of this work was to compare adhesion of two laminating films (PKCCO BOPP Thermal Laminating Film and Derprosa™ Matte Premier) to prints from different electrophotographic printers (e.g. Xerox, Canon, Konica-Minolta). The lamination conditions were as follows: lamination speeds 10 and 20 m/min, application temperature 120 ˚C and lamination pressure 400 kPa. The adhesion of the laminating film was evaluated by a Peel tester 1 hour, 1 day and 14 days after lamination. The quality of the lamination after the grooving and bending test was evaluated visually. The last measured parameter was colour difference between laminated and non-laminated prints and this parameter was evaluated 1 hour and 14 days after lamination. |
eng |
dc.format |
p. 107-113 |
eng |
dc.language.iso |
eng |
|
dc.publisher |
University of Novi Sad |
eng |
dc.relation.ispartof |
11th International Symposium on Graphic Engineering and Design : proceedings |
eng |
dc.rights |
open access |
eng |
dc.subject |
lamination |
eng |
dc.subject |
electrophotography |
eng |
dc.subject |
adhesion |
eng |
dc.subject |
peel test |
eng |
dc.subject |
colour difference |
eng |
dc.subject |
grooving |
eng |
dc.subject |
laminace |
cze |
dc.subject |
elektrofotografir |
cze |
dc.subject |
adhese |
cze |
dc.subject |
peel test |
cze |
dc.subject |
barvová odchylka |
cze |
dc.subject |
rýhování |
cze |
dc.title |
Lamination of electrophotographic prints |
eng |
dc.title.alternative |
Termolaminace elektrofotografickýck výtisků |
cze |
dc.type |
ConferenceObject |
eng |
dc.description.abstract-translated |
Byla sledována kvalita laminace výtisků ze 7 různých elektrofotografických tiskáren pěti výrobců (Canon, HP Indigo, Konica-Minolta, Xeikon, Xerox) ; byly použity 2 typy laminovací fólie (PKCCO BOPP Thermal Laminating Film a Derprosa™ Matte Premier). Laminace byla provedena při teplotě 120 °C a tlaku400 kPa rychlostí 10 resp. 20 m/min. Adheze laminovací fólie byla testována Peel Testerem 1 hodinu, 24 hodin a 14 dní po laminaci. Dále byla vizuálně posuzována kvalita laminace po rýhování a skládání. Posledním sledovaným prametrem byla barvová odchylka způsobená laminací. |
cze |
dc.event |
11th International symposium on Graphic Engineering and Design, GRID 2022 (03.11.2022 - 05.11.2022, Novi Sad) |
eng |
dc.peerreviewed |
yes |
eng |
dc.publicationstatus |
published |
eng |
dc.identifier.doi |
10.24867/GRID-2022-p10 |
|
dc.project.ID |
SGS_2022_005/Studium syntézy, struktury a reaktivity pokročilých makromolekulárních a nadmolekulárních struktur materiálů |
cze |
dc.identifier.obd |
39888221 |
|
Tento záznam se objevuje v následujících kolekcích
Zobrazit minimální záznam
|
Vyhledávání
Procházet
-
Vše v Digitální knihovně
-
Tato kolekce
Můj účet
|