dc.contributor.author |
Brtník, Bohumil
|
|
dc.contributor.author |
Matoušek, David
|
|
dc.date.accessioned |
2023-07-12T13:11:59Z |
|
dc.date.available |
2023-07-12T13:11:59Z |
|
dc.date.issued |
2022 |
|
dc.identifier.isbn |
978-1-66541-088-5 |
|
dc.identifier.uri |
https://hdl.handle.net/10195/81186 |
|
dc.description.abstract |
The Sallen-Key low-pass biquad shows a decrease
in attenuation at high frequencies because the real operational
amplifier has a finite transit frequency. As a result, the course
of the actual frequency response deviates from the ideal.
Generally, this phenomenon occurs only in even-order filters in
both Voltage Mode (VM) and Current Mode (CM) but is no
longer observed for odd-order filters. When determining the
order of the filter, it is always necessary to round the calculated
value upwards, so it is discussed whether it is appropriate to
round it up to the nearest odd number. Finally, this method of
attenuation decrease correction is compared with the correction
using another active element. |
eng |
dc.format |
p. 13-16 |
eng |
dc.language.iso |
eng |
eng |
dc.publisher |
IEEE (Institute of Electrical and Electronics Engineers) |
eng |
dc.relation.ispartof |
2022 New Trends in Signal Processing (NTSP) |
eng |
dc.rights |
open access (green) |
eng |
dc.subject |
low-pass filter |
eng |
dc.subject |
attenuation drop above transit frequency |
eng |
dc.subject |
voltage mode |
eng |
dc.subject |
current mode |
eng |
dc.subject |
higher-order filter |
eng |
dc.subject |
filtr dolní propust |
cze |
dc.subject |
pokles útlumu za tranzitní frekvencí |
cze |
dc.subject |
napěťový mód |
cze |
dc.subject |
proudový mód |
cze |
dc.subject |
řád vyššího filtru |
cze |
dc.title |
Influence of the Low-Pass Filter Order to the Attenuation Deviation at the High Frequencies |
eng |
dc.title.alternative |
Vliv řádu dolní proupusti na pokles útlumu na vysokých frekvencích |
cze |
dc.type |
ConferenceObject |
eng |
dc.description.abstract-translated |
Bikvad Sallen-Key dolní propust vykazuje pokles
útlumu na vysokých frekvencích, protože reálný operační
zesilovač má konečnou tranzitní frekvenci. V důsledku toho se průběh
skutečné frekvenční charakteristiky odchyluje od ideálního případu.
Obecně se tento jev vyskytuje pouze u filtrů sudého řádu
jak v napěťovém (VM), tak i proudovém (CM) módu, ale není
déle pozorované u filtrů lichého řádu. Při určování
řádu filtru je vždy nutné vypočítanou hodnotu zaokrouhlit
směrem nahoru, proto se diskutuje, zda je vhodné
zaokrouhlit nahoru na nejbližší liché číslo. Konečně tato metoda
korekce poklesu útlumu se porovnává s korekcí
pomocí přídavného aktivního prvku. |
cze |
dc.event |
International Conference on New Trends in Signal Processing, NTSP 2022 (12.10.2022 - 14.10.2022, Liptovský Mikuláš) |
eng |
dc.peerreviewed |
yes |
eng |
dc.publicationstatus |
postprint (accepted version) |
eng |
dc.identifier.doi |
10.23919/NTSP54843.2022.9920430 |
|
dc.relation.publisherversion |
https://ieeexplore.ieee.org/document/9920430 |
|
dc.identifier.scopus |
2-s2.0-85141564608 |
|
dc.identifier.obd |
39887387 |
|