ANISOTROPY AND HARDENABILITY OF INTERSTITIAL FREE STEELS UNDER THE INFLUENCE OF LOCALIZED DEFORMATION

Show simple item record

dc.contributor.author Klejch, Filip
dc.contributor.author Schmidová, Eva
dc.contributor.author Mejtský, Tomáš
dc.date.accessioned 2023-07-12T13:10:17Z
dc.date.available 2023-07-12T13:10:17Z
dc.date.issued 2022
dc.identifier.issn 2466-4677
dc.identifier.uri https://hdl.handle.net/10195/81163
dc.description.abstract Interstitial Free (IF) steels are nowadays commonly used for stamping complex parts of outer automotive bodies. Current requirements for fast production lead to the need of monitoring the real state of the material after stamping based on its real material conditions. It is desirable to describe and quantify the evolution of microstructure deformation and plastic conditions before and after the stamping process. This paper presents Electron Backscatter Diffraction analyses of deformed and non-deformed IF steel, including the quantitative measurement of the localized plastic response of the real stamped part, using an unconventional indentation method. The effect of strain rate was evaluated using the highspeed tensile tests. The increased ratio of the Low Angle Grain Boundaries was found as a good parameter to quantify the depletion of plasticity. eng
dc.format p. 125-131 eng
dc.language.iso eng
dc.relation.ispartof Applied Engineering Letters, volume 7, issue: 3 eng
dc.rights open access eng
dc.rights.uri https://creativecommons.org/licenses/by-nc/4.0/
dc.subject interstitial free (IF) steel eng
dc.subject local plastic response eng
dc.subject real stamped part eng
dc.subject high strain rate eng
dc.subject microstructure analysis eng
dc.subject Electron Backscatter Diffraction (EBSD) eng
dc.subject indentation eng
dc.subject ocel bez intersticiálů (IF) cze
dc.subject lokální plastická odezva cze
dc.subject výlisek cze
dc.subject vysoká rychlost deformace cze
dc.subject mikrostrukturní analýza cze
dc.subject EBSD analýza cze
dc.subject indentace cze
dc.title ANISOTROPY AND HARDENABILITY OF INTERSTITIAL FREE STEELS UNDER THE INFLUENCE OF LOCALIZED DEFORMATION eng
dc.title.alternative ANISOTROPIE A DEFORMAČNÍ ZPEVNĚNÍ BEZINTERSTICIÁLNÍCH OCELÍ POD VLIVEM LOKALIZOVANÉ DEFORMACE cze
dc.type article eng
dc.description.abstract-translated Oceli bez intersticiálu (IF) se v současnosti běžně používají pro lisování složitých dílů vnějších karoserií automobilů. Současné požadavky na rychlou výrobu vedou k nutnosti sledovat skutečný stav materiálu po lisování na základě jeho reálných materiálových podmínek. Je žádoucí popsat a kvantifikovat vývoj deformace mikrostruktury a plastických podmínek před a po lisování. Tento článek představuje analýzu elektronové zpětné difrakce deformované a nedeformované IF oceli, včetně kvantitativního měření lokalizované plastické odezvy skutečného lisovaného dílu, pomocí nekonvenční indentační metody. Vliv rychlosti deformace byl hodnocen pomocí vysokorychlostních tahových zkoušek. Zvýšený poměr maloúhlových hranic zrn byl nalezen jako dobrý parametr pro kvantifikaci vyčerpání plasticity. cze
dc.peerreviewed yes eng
dc.publicationstatus published eng
dc.identifier.doi 10.18485/aeletters.2022.7.3.5
dc.relation.publisherversion https://aeletters.com/wp-content/uploads/2022/09/AEL00365.pdf
dc.rights.licence CC BY-NC 4.0
dc.project.ID SGS_2022_009/Výzkumné problémy z oblasti dopravních prostředků a infrastruktury řešené na DFJP cze
dc.identifier.scopus 2-s2.0-85139442920
dc.identifier.obd 39887324


This item appears in the following Collection(s)

Show simple item record

open access Except where otherwise noted, this item's license is described as open access

Search DSpace


Advanced Search

Browse

My Account