All-solid Nafion®-based amperometric sensors for monitoring gaseous oxygen
ČlánekOtevřený přístuppeer-reviewedpublishedDatum publikování
2012
Vedoucí práce
Oponent
Název časopisu
Název svazku
Vydavatel
Univerzita Pardubice
Abstrakt
Oxygen reduction has been studied at three different designs of Au/Nafion®-based all-solid amperometric sensors. These consisted of a planar-type sensor (PTS) with all electrodes sputtered on the same face of the Nafion® membrane, a capillary planar type sensor (CPTS) with the introduction of a cover bearing a capillary, and a sandwich-type sensor (STS) with the working and counter electrode layers deposited on different sides of the polymer
electrolyte membrane. The response of all sensors depended heavily on humidity and the degree of Nafion® hydration but, unlike the CPTS and STS configurations, no signs of a limiting current were recorded during voltammetric experiments at an open PTS device, indicating the absence of a significant diffusion barrier in that case. All three simple and inexpensive polymerbased sensors compared well with a commercial fuel cell-type sensor, regarding their response to gaseous oxygen concentration changes.
Rozsah stran
p. 211-234
ISSN
Trvalý odkaz na tento záznam
Projekt
Zdrojový dokument
Sensing in Electroanalysis. (K. Kalcher, R. Metelka, I. Švancara, K. Vytřas; Eds.). 2012, Volume 7.
Vydavatelská verze
Přístup k e-verzi
open access
Název akce
ISBN
978-80-7395-563-2 (printed)
978-80-7395-564-9 (on-line)
978-80-7395-564-9 (on-line)
Studijní obor
Studijní program
Signatura tištěné verze
Umístění tištěné verze
Přístup k tištěné verzi
Klíčová slova
oxygen sensors, amperometric sensor, polymer electrolyte, Nafion®