Photoactivity of nano-oxide layers of screen printed DSSC on glass and PET foils
Konferenční objektpublishedDatum publikování
2013
Vedoucí práce
Oponent
Název časopisu
Název svazku
Vydavatel
Univerzita Pardubice
Abstrakt
Polyethylene-terephthalate (PET) foils and glass slides coated with thin conductive layers were
used as substrates for TiO2 or ZnO based photoactive electrodes of dye-sensitized solar cells (DSSC). The nanoparticle oxides were applied onto the substrates in a form of alcohol pastes by screen printing or by doctor blade technique. Photocurrents and I-V load characteristics were measured depending on the solar cell composition and preparation. The influence of thin TiO2 blocking layer prepared by sol-gel technique is discussed.
Rozsah stran
p. 15-20
ISSN
Trvalý odkaz na tento záznam
Projekt
Zdrojový dokument
Vydavatelská verze
Přístup k e-verzi
open access
Název akce
XIth Symposium on Graphic Arts (17th to 18th June 2013, Pardubice, Czech Republic)
ISBN
978-80-7395-660-8 (Print)
978-80-7395-661-5 (Online)
978-80-7395-661-5 (Online)
Studijní obor
Studijní program
Signatura tištěné verze
Umístění tištěné verze
Přístup k tištěné verzi
Klíčová slova
TiO2, ZnO, solar cell, PET, screen printing