Zobrazit minimální záznam
dc.contributor.author |
Özdemir, Alp
|
cze |
dc.contributor.author |
Kocabas, Ibrahim
|
cze |
dc.contributor.author |
Švanda, Pavel
|
cze |
dc.date.accessioned |
2017-05-11T11:04:52Z |
|
dc.date.available |
2017-05-11T11:04:52Z |
|
dc.date.issued |
2016 |
eng |
dc.identifier.issn |
0169-4243 |
eng |
dc.identifier.uri |
http://hdl.handle.net/10195/67519 |
|
dc.description.abstract |
The aim of this paper is to model an interface adhesion and failure mechanism of single lap joints, subjected to tensile loading, focusing on the effects of various surface treatments, including surface characterization parameters, such as surface roughness and contact angle of adherend surfaces. The applied surface treatments are sandblasting, etching, anodic oxidation and hybrid processes. The influence of surface treatment techniques and conditions on single lap joint strength and interfacial properties is investigated by performing a static tensile test. A numerical approach, which is a cohesive zone model, is implemented using ABAQUS (TM) and introduced to create a correlation between maximum interface traction and surface processing parameters, such as surface roughness and work of adhesion. As a result of experiments, an etching plus sanding process was found to provide the best single lap joint performance (8726 N), having surface roughness of Ra = 2.93 mu m and work of adhesion, W-a = 119.4 mJ/m(2). Based on numerical solutions, a correlation between maximum interface traction and type of surface treatment process has been established, taking certain assumptions into consideration. |
eng |
dc.format |
p. 2573-2595 |
eng |
dc.language.iso |
eng |
eng |
dc.publisher |
Taylor & Francis Ltd. |
eng |
dc.relation.ispartof |
Journal of Adhesion Science and Technology, volume 30, issue: 23 |
eng |
dc.rights |
open access |
eng |
dc.subject |
Adhesive |
eng |
dc.subject |
finite-element method |
eng |
dc.subject |
surface roughness |
eng |
dc.subject |
surface treatment |
eng |
dc.subject |
single lap joints |
eng |
dc.subject |
mild steel |
eng |
dc.subject |
lepidlo |
cze |
dc.subject |
metoda konečných prvků |
cze |
dc.subject |
drsnost povrchu |
cze |
dc.subject |
předúprava povrchu |
cze |
dc.subject |
jednoduše přeplátovaný spoj |
cze |
dc.subject |
konstrukční ocel |
cze |
dc.title |
Improving the strength of adhesively bonded joints through the introduction of various surface treatments |
eng |
dc.title.alternative |
Zvýšení pevnosti lepených spojů s využitím modifikace předúpravy povrchu |
cze |
dc.type |
article |
eng |
dc.description.abstract-translated |
Cílem práce je modelování adheze a mechanismu porušení jednoduše přeplátovaných lepených spojů. Byly vyžity různé předúpravy povrchů ocelových adherendů. Vlastnosti povrchu byly charakterizovány měřením drsnosti a kontaktního úhlu. Hodnocení pevnosti bylo provedeno pomocí pevnosti spojů v tahu. S využitím SW ABAQUS (TM) byly spoje též modelovány a byla hledána korelace mezi vlastnostmi povrchu a pevností spojů. |
cze |
dc.peerreviewed |
yes |
eng |
dc.publicationstatus |
postprint |
eng |
dc.identifier.doi |
10.1080/01694243.2016.1188872 |
eng |
dc.relation.publisherversion |
http://www.tandfonline.com/doi/abs/10.1080/01694243.2016.1188872?journalCode=tast20 |
|
dc.identifier.wos |
000379137300005 |
eng |
dc.identifier.scopus |
2-s2.0-84969862449 |
|
dc.identifier.obd |
39876910 |
eng |
Tento záznam se objevuje v následujících kolekcích
Zobrazit minimální záznam
|
Vyhledávání
Procházet
-
Vše v Digitální knihovně
-
Tato kolekce
Můj účet
|